INSTRUCTIONS
FOR YOUR NEW SIGN KIT
|
1. REMOVE BRUSHES, LID, & INK PAD FROM THE INK WELL.
2. POUR ABOUT 1 OUNCE CORRESPONDING COLOR OF INK INTO THE INK WELL OR TO THE MARK SHOWN ON THE BOTTLE.
3. NOW SET BRUSHES IN THE INK FOR 10 TO 15 MINUTES TO LET THEM SOAK UP THOROUGHLY.
| |
4. NOW PUT INK PAD BACK IN THE INK WELL, REPLACE THE LID AND BRUSHES.
PRESS DOWN ON THE BRUSHES SO INK PAD WILL ABSORB THE REST OF THE INK.
NOW YOU ARE READY TO MAKE SIGNS.
5. RE-INK BRUSHES WHEN THEY BECOME DRY BY PLACING THEM INTO THE INK WELL PRESS THEM DOWN 2 OR 3 TIMES SO THEY CAN SOAK UP MORE INK.
6. REFILL INK WELL WITH ABOUT 3/4 OF AN OUNCE OF INK EACH TIME THE PAD BECOMES DRY
****NOTE USING 3/4 OF AN OUNCE IS SUFFICIENT. TOO MUCH CAN CAUSE A MESS.
7. WE USE VERY FIRM FELT IN OUR BRUSHES SO IT TAKES LONGER TO ABSORB THE INK THE FIRST TIME. HOWEVER, USING FIRMER FELT DOES GIVE YOU MUCH LONGER WEAR WHILE MAINTAINING A FINER EDGE.
CALL 1-800-874-7256 TOLL FREE
THANK YOU FOR CHOOSING OUR POSTER AND SIGN MAKING KIT. WE ARE CONFIDENT YOU WILL GET MUCH USE AND FUN OUT OF THIS PRODUCT......
PROUDLY MADE IN THE USA
|
|
